OTK Kart Seats, Seat Stays & Padding for All 8 OTK Brands
Genuine OTK kart seats in Micro Baby, Mini 1 and 2, Junior and sizes 1 to 4 for all 8 OTK Kart Group brands: Tony Kart, Kosmic, Exprit, Redspeed, EOS, Gillard, CS55 and LN Kart. Plus seat stays, front seat supports, mounting plates, padding and fixings, in stock and ready to ship from the Netherlands.
The seat holds the driver in position, so it is regulated: the CIK-FIA technical regulations require a seat that stops the driver from moving forward or sideways in corners and under braking, with reinforcement plates between the seat and its supports, and every support bolted or welded at both ends. Tony Kart, Kosmic Kart, Exprit Kart, Redspeed Kart, EOS Kart, and Gillard Kart share the same chassis platform under OTK Kart Group, along with the Carlos Sainz CS55 and LN (Lando Norris) signature karts, so one seat range covers all eight brands.
OTK flat bottom seats come in Micro Baby, Mini 1 and 2, Junior, and sizes 1 to 4, in a polyester shell with medium flex. The small and large seat mounting plates are the plates that go between the seat and the seat stays. Check the Seat Size and Position Charts before you order to match the seat size and position to the driver.
Seat stays, also called seat struts or seat supports, are sold in straight, bent, and double bent versions: 320mm double bent, 340mm bent, 320mm ROK bent, a Ø28mm standing stay, a dismountable standing stay, and a 300mm extra standing stay bent for KZ engines, plus a stay extension bracket. The adjustable seat stay is available left and right, with its seat part, bearing cup part, 3mm plate, threaded pin, and M14 x 2 nuts (right-hand and left-hand thread) sold separately. Front seat supports come in 24mm and 42mm and as a kit for DD2, KZ, and OK.
For comfort and fit there are OTK seat padding in black (2 pieces), Goldspeed seat padding sets in 10mm, a Caliba seat with foam insert, and a Sparco kart seat protection. Seat fixings are in stock too: nylon seat mounting rings, M8 countersunk bolts, M8 aluminum countersunk washers, nylon lock nuts, and the Ø30mm frame clamp.
For the rest of the driver area, see Pedals & Extension Kits, Floor Trays, and Steering. Ballast may be fixed to the seat with at least two bolts of 6mm or larger, see Weights & Cables & Locks.
Why buy OTK seats from Koene
We’re an official importer and dealer of genuine OTK parts, not a reseller of unverified stock, and we sell seats, stays, plates, and padding separately, so you can replace exactly the part you need. Combined with parts ready to ship from our own Netherlands stock and karting-specific technical knowledge built up since 1992, that means the correct seat and stay for your kart the first time.